How Many Euro Pallets Fit in a 40ft High Cube?

A 40ft high cube takes 20 to 25 Euro pallets on the floor in a single layer: 20 with every pallet loaded the same way, 25 with one lane longways and one lane turned. Counts come from the 12032 x 2352 mm usable interior with no overhang and no stacking.

Total pallets loaded
20
20
Per floor layer
1
Tiers high
68%
Floor used
41%
Volume used
40 ft High Cube: 1,203 × 235 × 270 cm interior
Load diagram
Floor plan, 20 per layer1 tier(s) high
boxes / itemsSingle-orientation packing, real pinwheel patterns may fit a few more.

By pallet type

The short answer

20 Euro pallets loaded straight (10 down by 2 across, long side down the length), or 25 with one lane longways and one lane turned. Single tier, no overhang.

The high cube has exactly the same floor as a standard 40ft, so the count is the same 20 to 25. What you gain is 305 mm of height, which matters if your Euro pallets are built tall or you want to stand a second tier of light cases on top.

Internal dimensions used

  • 40 ft High Cube: 12032 x 2352 x 2698 mm usable interior (474 x 93 x 106 in), 26,580 kg payload.
  • Euro pallet (EUR / EPAL 1, 1200 x 800 mm): 1200 x 800 mm footprint (47.2 x 31.5 in), 144 mm deck, 1,500 kg dynamic rating.

Usable figures sit a little under nominal to allow for corrugation, posts and the door frame; the count is a plain grid with no overhang.

Long side or short side down the container

Longways (1200 mm side down the length): 10 down x 2 across = 20 pallets, 32 mm spare at the doors and 752 mm across. Floor used 67.8%.

Turned (800 mm side down the length): 15 down x 1 across = 15 pallets, 32 mm spare at the doors and 1152 mm across. Floor used 50.9%.

Mixed lanes: 1 lane longways (10 each) beside 1 lane turned (15 each) = 25 pallets. The lanes use 2000 mm of the 2352 mm width and floor used rises to 84.8%. Two turned lanes will not fit side by side, so one of each is the best use of the width; the calculator above reports the straight 20.

What changes with double stacking

Two tiers need every loaded pallet, deck included, at or under 1349 mm in the 2698 mm interior: goods no higher than 1205 mm on a 144 mm deck. The 1500 mm load preset here (1644 mm with the deck) is one tier only. Under 1205 mm the floor count doubles to 50, if the bottom tier can carry the top.

Weight usually bites first. At the full 1,500 kg pallet rating the 26,580 kg payload caps the load at 17 pallets, before the floor is even full. Real loads run lighter, but add the total up before planning a second tier.

The same Euro pallet in the other three

ContainerInterior L x W (mm)LongwaysTurnedBest floor
20ft Container5898 x 23528711 mixed
40ft Container12032 x 2352201525 mixed
40ft High Cube (this page)12032 x 2352201525 mixed
53ft Trailer16002 x 2591394040 turned

Check it with the calculators

The calculator above is preset to this pallet and container; change the load height or add a pallet weight to see tiers and payload. For other pallet sizes in the same box, use 40ft high cube container calculator or the pallets in a 40ft container; for any pairing, the pallets per container calculator. To plan the pallet itself, see the Euro pallet calculator.

Frequently asked questions

Why do some sources say 25 Euro pallets in a 40ft high cube and others say 20?
Both are right. Twenty is every pallet loaded the same way, 10 down by 2 across. The 25 comes from 1 lane longways (10 each) beside 1 lane turned (15 each) in 2000 mm of the 2352 mm width. Neither needs overhang.
How many Euro pallets fit in a 40ft high cube double stacked?
Up to 50, if each loaded pallet is 1349 mm or under with its 144 mm deck (goods to 1205 mm) and the bottom tier can carry the top. The 1500 mm load preset on this page fits one tier.
What 40ft high cube dimensions does this use?
A usable interior of 12032 x 2352 x 2698 mm (474 x 93 x 106 in) and a 26,580 kg payload, the same figures as the calculator.